Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Gutter Replacement: The Henderson Owner’s Guide
CertainTeed-compatible gutter replacement in Henderson typically runs $12 to $22 per linear foot installed, and most single-story runs can be completed in one day once the material is on site. We are an independent contractor and are not affiliated with CertainTeed. Owners usually find us when the symptom is obvious: water sheeting off the fascia during a storm, or the north wall of the house starting to show the drywall cracks that come from chronically overrunning gutters.
Before we go further, one thing that matters. Gutter replacement is planned work, not emergency work. We schedule it, order to the correct profile, and install it once. Call (833) 691-6717 and we will book a free estimate at a time that works for you.
Which CertainTeed Models This Applies To
CertainTeed sells through two practical channels in this market. The first is its dealer-formed seamless gutter systems, run on site to a specific profile and gauge. The second is the retail hanger and end-cap components that come in 5-inch and 6-inch K-style, plus the half-round profiles used on older custom homes around the older sections of Henderson. The 5-inch K-style is far and away the more common on this valley’s subdivisions, and it is also the one most likely to be confused with a competing profile because the outside dimensions sit within a fraction of an inch of other brands.
If you are trying to identify what is on your house, skip the label on the old hanger; they weather off within a few seasons. Measure instead. Run a tape across the back flat of the gutter to the inside lip and note the depth. Take a photo of the gutter from the ground with the fascia visible so the profile is clear. Bring those two numbers and we can match the run without guessing. CertainTeed parts are OEM-marked on the inside face of end caps and on the hanger shoe, but that stamp disappears after a handful of summers in Nevada sun, so measurement is the reliable path.
On the OEM-versus-aftermarket question, this is where a plain answer is worth more than a technical one. For a gutter run, the profile and gauge matter more than the brand printed on the box. A quality aftermarket hanger matched to a 0.032-gauge 5-inch K-style will outlast a branded component sitting on the wrong profile. We install CertainTeed products, and we will tell you plainly if the correct match on your house is one of the other six manufacturer lines we carry, including GAF and Owens Corning accessories. No substitutions without your approval in writing.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Signs Your CertainTeed Gutter Replacement Is Failing
Gutters do not announce themselves. They give warnings, and they are easy to read if you know what a Henderson summer does to them.
- Water overflowing at the corners, not the middle. The corner of a run is the highest-stress joint on the gutter, and a failed seal or a slipped hanger shows up there first. If water falls at the corner during a heavy monsoonal rain, the joint has let go or the fascia has begun to rot behind it.
- Visible sag between hangers. Hanger spacing at 24 inches is common but not forgiving in this heat. The sun softens the fascia board over the years, the fastener loses bite, and the run sags. A sag is not a cosmetic issue; the low spot holds water and directs overflow onto the soil line against the foundation.
- Paint or stain lines on the fascia behind the gutter. This is the one most owners catch last, and it means water has been running behind the gutter for a while. That is fascia damage already in progress, and it will be a repair line on your estimate.
- Drywall cracks and paint blistering on interior walls near the roofline. When gutters overrun, the soil along the foundation sits wetter than it should. In Henderson’s shrink-swell clay, that shows up as hairline cracks in nearby interior walls.
- Granule accumulation at the downspout outlet. A pile of asphalt granules in a fresh low spot means the roof above is shedding and the gutter is carrying it. It is also a sign the roof may be closer to replacement than the gutter. One photo-documented inspection will tell you which.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Line-item pricing for Henderson homes, installed:
- 5-inch K-style seamless, per linear foot: $12 to $16
- 6-inch K-style seamless, per linear foot: $15 to $20
- Half-round profile, per linear foot: $18 to $22
- Downspout, per linear foot: $7 to $12
- Fascia repair, per linear foot (when rot is found): $25 to $45
The number is driven by profile, gauge, number of corners and downspout drops, and how much fascia work is uncovered. The hangers and end caps are included in the per-foot figure; we do not itemize the small parts to make the total look smaller. Every job is backed by our 90-Day Done Right Promise: a written workmanship guarantee with no arguing and no paperwork runaround. If it is not right, we come back and make it right. The number on the estimate is the number on the invoice.
DIY or Call Us?
Replacing a gutter run involves ladder work at roofline, and in this valley the second story plus summer heat is a serious combination. It is not a task we would send a homeowner after. There is also a fastening question that matters: the correct fastener length depends on the thickness of the fascia under the hanger, and guessing wrong either leaves the hanger loose or drives the screw through the back of the fascia. We handle that with background-checked, uniformed technicians on every job. What you can safely do is look.
Walk out with binoculars after a rain and note where water exits the gutter. Look at the stain pattern behind the gutter from the ground. Photograph the profile from a safe spot. Those three observations save us time and save you an estimate window. Call (833) 691-6717 and we will book your free estimate.
FAQs
With steel profiles and proper fastening, 20 to 30 years is realistic in a shaded lot; 15 to 20 years is a much fairer expectation on a full western exposure. The limiting factor here is not the metal, it is the constant heat-cycle movement on the fascia behind it. Fastener backs out over time. Once a run shows visible sag between hangers, the clock on the fascia has started. Call (833) 691-6717 for a free inspection before it goes further.
Often yes, if the fascia underneath is sound. A run with two or three failed hangers and one leaking corner is a repair, and we will tell you so. If two or more runs show rot behind the gutter, or the fascia has visibly swelled, replacement is the honest answer. Call (833) 691-6717 and we will write both numbers on the estimate so you can compare side by side.
A typical single-story run for a Henderson home is done in a single visit, usually a morning. Two-story and multiple-run jobs are scheduled for a full day. Rain-dependent scheduling is the main variable; the job does not start and stop in a way that leaves you without cover.
We measure the profile on site and match it to the correct CertainTeed or approved equivalent before anything is ordered. No substitutions without your written sign-off. That means a photo-documented measurement, not a look-and-guess. Free second opinions on any written estimate are also available if you already have one in hand.
When you are ready, call (833) 691-6717 for a free estimate. A live person answers every call, day or night, and we will be there when we say.
Written by the team at Ridgeline Roofing Co. Henderson, serving Henderson and nearby areas.